Equipped with 7 uncooled drawers of 400x620x(H)65 mm.

Chamber dimensions: 1480x670x(H)570 mm.

60 mm thick polyurethane foam insulation.

2 shelves (600x400mm) included.

Spread load capacity of 15 kg each.

Energy label (counter only): A (A+++-G).
Weight: 367 kg.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Seven drawers hold 7x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess holds 7x (GN1/6 150).
The cold recess is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers hold 4x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The rear edge of the worktop has a raised cold recess section 1/6 For GN containers.
The cold cavity holds 7x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Ten drawers can hold 10x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 9x (GN1/6 150).
The cold recess is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Seven drawers hold 7x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 9x (GN1/6 150).
The cold compartment is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Eleven drawers can hold 9x (GN1/1 150) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 10x (GN1/6 150).
The cold recess is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Twelve drawers can hold 4x (GN1/1 100), 6x (GN1/1 150) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly changed if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 10x (GN1/6 150).
The cold recess is covered by acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Thirteen drawers can hold 8x (GN1/1 100), 3x (GN1/1 150) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 10x (GN1/6 150).
The cold recess is covered by acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Fourteen drawers can hold 12x (GN1/1 100) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 10x (GN1/6 150).
The cold recess is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Ten drawers can accommodate 8x (GN1/1 100) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section 1/6 For GN containers.
The cold cavity holds 10x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Eight drawers can hold 6x (GN1/1 150) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section 1/6 For GN containers.
The cold cavity holds 10x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Nine drawers can hold 4x (GN1/1 100), 3x (GN1/1 150) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
There is a raised cold cavity part for 1/6 GN containers.
The cold cavity can hold 10x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers hold 4x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
Both cabinets have 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The rear edge of the worktop has a raised cold recess section 1/6 For GN containers.
The cold cavity holds 9x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Six drawers hold 4x (GN1/1 100) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
Both cabinets have 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section 1/6 For GN containers.
The cold cavity holds 10x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Two drawers hold 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
Each cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 10x (GN1/6 150).
The cold compartment is covered by an acrylic glass lid.

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Four drawers can hold 3x (GN1/1 150) and 1x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet is located on the left side of the refrigerator as standard.
If necessary, the cabinet position can be changed (please specify when ordering).
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify on request).
The worktop has milled edges, it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers can hold 4x (GN1/1 100) and 1x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet is located on the left side of the refrigerator as standard.
If necessary, the cabinet position can be changed (please specify when ordering).
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify on request).
The worktop has milled edges, it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
One drawer can hold one (GN1/1 200) GN container.
The drawer opens 110% so that GN containers are easy to place in the drawer.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
Both cabinets have 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides for the cabinets (please specify when ordering).
The worktop has floured edges, and it is also possible to order cabinets with a birch wood or stone worktop (please specify when ordering).

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Seven drawers can hold 6x (GN1/1 150) and 1x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet is located on the left side of the refrigerator as standard.
If necessary, the cabinet position can be changed (please specify when ordering).
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify on request).
The worktop has milled edges, it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Nine drawers can hold 8x (GN1/1 150) and 1x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet is located on the left side of the refrigerator as standard.
If necessary, the cabinet position can be changed (please specify when ordering).
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify on request).
The worktop has milled edges, it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Nine drawers hold 9x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The worktop has floured edges, and it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Replaceable cooling unit.
Adjustable height legs (+/- 15mm).
Eight drawers can hold 8x (GN1/1 100) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
Both cabinets have 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The worktop has floured edges, and it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Replaceable cooling unit.
Adjustable height legs (+/- 15mm).
Three drawers can hold 3x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
Each cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The worktop has floured edges, and it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).

Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
The drawer can hold one (GN1/1 200) GN container.
The drawer opens 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The worktop has floured edges, and it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).

Chamber capacity: 254 l.
Chamber dimensions: 1295x595x(H)475 mm.
Includes 3 shelves 335x570 mm, maximum load capacity 15 kg (with evenly distributed load).
Cooling top unit with static cooling.
Cooling top unit for 6x GN 1/4, dimensions 1405x335x(H)435 mm.
Climate class: table: 4, cooling top unit: 5.
Refrigerant: R600a (70 g + 40 g).
Average daily electricity consumption: 1.6 kW (table), 1.55 kW (top unit).
Self-closing door.
Energy label (counter only): A (A+++-G).
Weight: 193+41 kg.