Faucet with built-in long spout and long lever.
Faucet diameter 20mm, distance of the spout from the center 230mm.
Water flow 15L per minute.

Faucet with long spout and long lever.
Faucet diameter: 20mm, spout length 320mm.
Water output 20L per minute.

Single hole, rotary spout
Stream control
Required table opening: 30 mm
Connector hoses: 3/8", length: 350 mm
Tap height: 445 mm
Tap made of polished stainless steel

Tap made of polished stainless steel
Single hole, rotary spout
Stream control
Required table opening: 30 mm
Connector hoses: 3/8", length: 400 mm
Spout range: 190 mm
Tap height: 370 mm

Ideal for any chef to keep their appliances spotless.

Suitable for cleaning any number of waterproof appliance parts and surfaces.

A 2 meter long hose brings many objects into range.

Ergonomic handle with valve lever is comfortable to hold.

Supplied with a dedicated holder that can be placed on oven housing (as indicated by technician) or on the wall using 3 screws.

Jet is divided into a number of smaller ones using a strainer which increases the cleaning area covered.

Water temperatures from 5°C to 85°C are ideal.

Maximum water flow rate up to 11 L/m at pressure of 3 bar.

Recommended supply water pressure: 3 bar.

Operating pressure of supply water: 0.5 to 7 bar.

PA66 nylon housing, metal parts made of chrome-plated steel.

Water supply connection: 1/2” inner diameter.

Tap made of stainless steel
Single hole, rotary spout
Stream control
Required table opening: 27 mm
Connector hoses: 1/2", length: 400 mm
Spout range: 180 mm
Tap height: 225 mm

Made from stainless steel
Single hole, rotary spout
Stream control
Shower length: 120 cm
Required table opening: 32 mm
Connector hoses: 3/8", length: 350 mm
Spout range: 230 mm
Tap height: 230 mm

Shower resistant to high-pressure water stream
Plastic shield
Wall-mounted handle that can be shortened
Required table opening: 27 mm
Connector hoses: 1/2", length: 400 mm
Tap height: 1030 mm

Single pedestal pillar tap.

Rinser resistant to high pressure water flow.

Maximum water flow: 17 L/min.
at a pressure of 4 bar.

Plastic rinser handle.

Adjustable column support.

Wall mount (optional shortening).

Connection hoses: 1/2”, 400 mm long each.

Table hole required: Ø 27 mm.

Long lever for mixing hot and cold water.
Connection hoses: 3/8”.

Mounting hole required: ø35 mm.

Swivel spout, radius 215 mm.

Single-hole, separate knobs for hot and cold.
Connection hoses: 1/2”.

Mounting hole required: ø30 mm.

Swivel spout, radius 250 mm.

Includes: shower hose, tension spring and steel cable with fastening
Feed water temperature: 5-85 °C
Maximum water flow: 12 l/min at 3 bar
Feed water operating pressure: 0.5-7 bar
Connection to water mains valve: 1/2”
Chrome-plated steel parts
Hose length 3 meters

Single-hole pillar tap.

Rinser resistant to high pressure water flow.

Plastic rinser casing.

Adjustable column support.

Wall mount (optional shortening).

Connection hoses: 1/2”.

Table hole required: Ø 30 mm.

Spout reach 280 mm.

Shower resistant to high-pressure water stream
Single-hole tap, rotary spout
Plastic shield
Wall-mounted handle that can be shortened
Required table opening: 32.5 mm
Connector hoses: 3/8", length: 400 mm
Tap height: 1060 mm

Shower resistant to high-pressure water stream
Traditional wall connection separately for cold and hot water, rotary spout
Plastic shield
Wall-mounted handle that can be shortened
Tap height: 1010 mm