Vegetable Slicer - up to 450kg/h - incl 5 Cutting Disks
When needing to cut fruit and vegetables, this compact but professional vegetable slicer is the ideal kitchen helper. You can easily produce between 50 and 450kg of sliced fruit and vegetables in one hour.
Video
Before you can start cooking, you need to first do the food preparation. Cutting and slicing fruit and vegetables by hand can be time-consuming. With this professional vegetable slicer, you can quickly and efficiently cut slices, cubes, chips or julienne.
Compact table model
Start by washing the vegetables and fruits if necessary. Carefully select the required slicer and close the cover. Plug in the machine and push the green button to start the vegetable slicer. Lift the handle and place the vegetables and fruits in the round inlet. Push the handle down and use the food pusher to guide the vegetables/fruits towards the cutting discs. The handlebar is equipped with a safety switch, this switch will automatically stop the machine when you move the handlebar up or down. When you are done cutting the food, press the red button to turn off the machine. With the different cutting discs that come with this machine, you can slice almost any item exactly the way you need it. This machine includes cutting disks of 2 and 4mm as well as three graters of 3, 4 and 7mm. Additional slicers like julienne slicers and dicing grids for cutting fries are also available on our website.
Easy to clean
To maintain good hygiene, it’s important to thoroughly clean any appliance that comes into contact with food. This machine’s robust and easy-to-clean aluminum housing with stainless steel sheet metal, can be wiped down with a damp cloth and mild detergent. The loose parts of the machine can be cleaned in warm, soapy water. After washing, make sure to dry everything thoroughly and apply a little vegetable oil to the cutting discs for proper maintenance.
Features
- Durable stainless steel case
- 1 speed of 270 RPM
- Large inlet for bigger products
- Capacity of 50 to 450 kg per hour
- Available with a wide range of accessories
Product Specifications
- Net weight: 22.46kg
- Capacity: 50-450kg/h
- Device dimensions: H40 x B29 x D54cm
- Opening for small items: 5cm diameter
- Opening for larger items: 8cm x 17cm
- 230V/50Hz/1Phase 550W
Including
- Standard slicer 2mm
- Standard slicer 4mm
- Grater 3mm
- Grater 4mm
- Grater 7mm
Note:
For dices, combine the dicing grid with a standard slicer disc in the same size. This also applies to the french fries slicer.
Product dimensions | 29 x 54 x 40 cm |
Net weight, kg | 22.46 |
The appliance is designed for chopping vegetables (delicate products in particular) and forming them so as to achieve the desired shape using a wide range of OPTIONALLY available discs and grids – possibility to obtain a range of various slices, shreds, bars, cubes, or fries.
Model CA-4V for cutting small cabbages.
New, intuitive, electronically controlled panel for easy operation, offering a range of many important functions.
Choice of up to 5 knife speeds, perfect for various types of vegetables.
Powerful brushless motors effectively maintain torque.
Control of slicing force assuring identical slicing of top highest quality.
SENCO FORCE motor overload alarm function.
FORCE CONTROL function indicates the motor power in use.
An additional FORCE CONTROL enables observing the following:
– current in the motor.
– motor power at a given moment.
– temperature in the IGBT electronic module.
– temperature inside the motor housing.
Made of stainless steel and cast aluminium, it is distinguished by its high durability and fitness for heavy-duty work.
Disc diameter: 205 mm.
Speed: 300-1,000 rpm.
Equipped with a large container for vegetables: 136 cm² or 286 cm².
Knife design guarantees repeatable cutting.
Side exit for chopped vegetables enables placing the vegetable cutter on a narrow worktop.
High profile ejection disc for better efficiency of the appliance.
Output: up to 500 kg/h.
Easily detachable lid with presser.
Double accident protection: the motor automatically shuts off when the lid is removed and/or the presser is lifted.
3205,60 €
Equipped with a large container for vegetables: 136 cm2.
Hole dimension: 180x87 mm.
Output: from 150 up to 450 kg/h.
Power/voltage: 550 W/230 V.
Net weight: 21 kg.
1651,90 €
Equipped with a large container for vegetables: 136 cm2.
Hole dimension: 180x87 mm.
Output: from 150 up to 450 kg/h.
Power/voltage: 550 W/400 V
Net weight: 21 kg.
1651,90 €
Durable housing made of aluminium, with smooth and precise finish.
Cutting disc fitted with a metal bayonet mount which wears out much more slowly than plastic bearing sleeves.
2 inlets:
– large inlet with a pusher on a movable arm,
– smaller inlet with a detached pusher.
High work hygiene – the cutter was designed to prevent accumulating dirt:
– smooth, straight grip of the pusher,
– on/off switch with a uniform surface,
– smooth and precise finish of the housing at any point of the body.
Included in the set:
– 5 blade discs to achieve different cutting results: 2 and 4 mm slices and 3, 4, 5 and 7 mm shavings,
– ejector disc,
– special cleaning brush.
Safety features: the lid is fitted with a latch and a screw.
The pusher arm of the large inlet and the cover screw are equipped with a microswitch (electromagnetic sensor); lifting the pusher arm or loosening the cover screw switches the appliance off.
The motor is well protected against overheating thanks to a large and effective cooling fan, and 15 ventilation openings on the whole surface of the lower cover.
Speed: 295 RPM.
Output: 100-300 kg/h.
Disc diameter: ⌀205 mm.
Additional accessories in the HENDI offer to be purchased separately:
– Slicing disc (code 280096),
– Grating disc (code 280317),
– Dicing disc (code 234730),
– French fries cutting disc (code 234754),
– Julienne disc (code 280423),
– Rasping disc (code 280621),
– Rack for 18 vegetable cutter discs (code 280690).
883,80 €
Designed for cutting large amounts of vegetables.
Large inlet for large vegetables, up to Ø 165 mm.
Small inlet for long vegetables, i.e.
carrots, cucumbers up to Ø 55 mm.
Cutting chamber housing made of cast aluminium, bottom part of the housing made of stainless steel.
Convenient pressing handle.
750W = 1hp air-cooled high-performance motor.
Low-voltage control buttons: STOP, START (24 V).
2 security systems: cutter switches off upon lifting of the pressing handle and upon lifting of the upper cover of the chamber.
Upon lowering of the pressing handle the cutter starts automatically.
Easy and fast replacement of cutting disks.
5 cutting discs included: 2 mm slices (disc with 3 blades), 4 mm slices (disc with 3 blades), 3 mm grater, 4,5 mm grater, 7 mm grater, ejector disc.
4 rubber anti-slip feet.
Speed: 300 RPM.
Productivity: 100 – 350 kg/h
Weight: 25 kg.
985,30 €