Tap with pull out rinser, HENDI
Single-hole pillar tap.
Rinser resistant to high pressure water flow.
Plastic rinser casing.
Adjustable column support.
Wall mount (optional shortening).
Connection hoses: 1/2”.
Table hole required: Ø 30 mm.
Spout reach 280 mm.
Net weight, kg | 4.52 |
Professional version.
Housing made of fiber reinforced nylon.
Stainless steel shaft and blade.
Easy to clean.
Shaft length: 250 mm.
Suitable for dishes up to 20 liters.
Weight 1,45 kg.
Speed 15.000 RPM.
301,20 €
Very easy in use, cleaning, maintenance and even servicing.
Perfect for washing plates, cutlery, glasses, mugs, trays.
Electromechanical controls.
Housing made of stainless steel AISI 304.
Separate spray arms for washing (plastic) and rinsing (stainless steel).
Fixed washing arms at the top, rotating stainless steel rinsing arms.
Water consumption of only 2-2.5 liter per cycle (depending on water pressure).
Washing water temperature: 62°C, rinse water temperature: 85°C.
Solid double-skin door.
Washing cycles number/duration: 1/120 s.
Capacity: up to 30 baskets/h.
Water consumption per cycle: 2-2,5 l (depending on water pressure).
Washing water temperature: 62°C, rinse water temperature: 85°C.
Boiler (capacity/power): 6 l/3 kW for 230V and 6 kW for 400V.
Tank (capacity/power): 35 l/3,6 kW.
Pump power: 0,75 HP.
Safety thermostat for boiler/for tank up to 105°C/99°C.
Analog water thermometer for boiler.
IP44 protection class.
Weight: 57 kg.
EQUIPMENT:
- 1x universal baskets 500x500x(H)105 mm for glasses
- 1x basket with pins 500x500x(H)105 mm for plates
- 1x cutlery basket 110x110x(H)130 mm
- water supply hose length 1,5 m with connection 3/4” inner thread
- drain hose length 2 m Ø 25 mm
- power cord without plug,
- rinse aid dispenser
- adjusted for detergent pump installation (screw in tank rear wall).
Vertically adjustable legs: ±10 mm, Ø 40 mm.
1536,00 €
Stainless steel housing.
Digital control panel.
Timer adjustable up to 24 hours, in 30-minute intervals.
Temperature control: 35°-75°C, adjustable in 5°C increments.
The quiet fan circulates the warm air inside the chamber ensuring an even dehydration without the necessity to turn the trays.
The set includes 6 305x330 mm stainless steel grates.
Grates are evenly interspaced, easy to remove and clean.
Transparent door allows the operator to observe the dehydration process.
202,70 €
Fitted with single glazing and curved front glass.
Three levels.
Two sliding doors at the back.
Made of stainless steel.
LED light at the top of the chamber.
With 3 chrome-plated adjustable shelves.
Temperature control knob and analogue thermometer.
Temperature range: 30°-90°C.
637,40 €
Weighs up to 15.000g with gradation of 1g with a minimum of 2g.
Seamless stainless steel surface, housing made of HIPS plastic with integrated display.
High precision strain gauge sensor for accurate measurements.
Readout in grams.
Touch control with on-off and tare buttons.
With auto tare, overload and low power indication.
Auto power off.
Powered by 3 AAA batteries (not included).
39,20 €