SARO Saladette with 3 doors, model BALDUR S 903
Material: (housing and interior) stainless steel.
3 doors, telescopic sliding lid.
Polyethylene cutting board.
Delivery without GN container.
Allocation option above: 4x 1/1 GN containers, up to 150 mm deep (other combinations possible).
3 height-adjustable grids and 3 sets of support rails.
Digital temperature control (DIXELL).
Evaporator foamed on 3 sides.
Static cooling with circulating air fan.
Automatic defrost.
Temp.: +2 / +8 °C.
Connection: 230 V - 50 Hz - 0.23 kW.
Grids: 3x W 323 x D 570 mm.
Sound level: 43.2dB(A).
External dimensions: W 1364 x D 700 x H 870-890 mm.
Weight: 120.5kg.
Refrigerant: R600a.
Energy consumption: approx.
3.725 kWh/24h (lid closed).
| Net weight, kg | 105 |
Chamber dimensions: 822x570x(H)580 mm.
2 shelves (330x545 mm) included.
Spread load capacity of 40 kg each.
Coolant: R600a.
Energy label: A (A+++-G).
Weight: 95 kg.
1565,00 €
Dimensions of refrigerated chamber: 830x595x(H)500 mm
Basin capacity: 5x GN 1/6, max.
H 150 mm
Delivered without containers
1 auxiliary fan in the refrigerated chamber
Weight: 68 k
985,30 €
Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+ 15mm).
Eight drawers can hold 6x (GN1/1 150) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The worktop has a cold recess that can hold 6x (GN 1/2 150).
Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
One drawer can hold one (GN1/1 150) GN container.
The drawer opens 110% so that GN containers are easy to place in the drawer.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 4x (GN1/6 150).
The cold storage compartment is covered by an acrylic glass lid.
Dimensions: 1792x700x835 mm.
Power: 202W /230V.
Net volume: 214 L.
Temperature range: -2 / +8 C degrees.
Self-closing doors with 120° stop position.
Suitable for GN 1/1 containers.
Adjustable stainless steel legs with a height of 125-200 mm.
Epoxy-coated wire shelves - maximum load 40 kg.
AISI 304 stainless steel inside and AISI 201 stainless steel outside.
