Material: (housing and interior) stainless steel; (work surface) stainless steel.
2 doors, self-closing.
2 height-adjustable grids and 2 sets of support rails.
Extractable compressor for easy cleaning.
Do-it-yourself drawers available separately (see page 69).
Digital temperature control (DIXELL).
Insulation: 60 mm.
Forced air cooling.
Automatic defrost.
Temp.
-2 / +8 °C.
Connection: 230 V - 50 Hz - 0.30 kW.
Grids: 2x W 335 x D 530 mm.
Sound level: 40dB(A).
Content (gross): 314 liters.
External dimensions: W 1360 x D 700 x H 890-950 mm.
4 adjustable feet.
Weight: 132kg.
Refrigerant: R600a.
Energy efficiency class: B (spectrum A+++ to E) with climate class 5 -> high-performance device!.

Material: (housing and interior) stainless steel.
1 door (hinge can be changed), telescopic sliding lid.
Polyethylene cutting board.
1 height-adjustable grid and 1 set of support rails.
Digital temperature control (DIXELL).
Evaporator foamed on 3 sides.
Static cooling with circulating air fan.
Automatic defrost.
Temp.
+2 / +8 °C.
Connection: 230 V - 50 Hz - 0.23 kW.
Grids: 1x W 323 x D 570 mm.
Sound level: 41dB(A).
External dimensions: W 435 x D 700 x H 870-890 mm.
Weight: 62kg.
Refrigerant: R600a.

Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Eight drawers hold 4x (GN1/1 100) and 4x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 9x (GN1/6 150).
The cold compartment is covered by an acrylic glass lid.

Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+ 15mm).
One drawer can hold one (GN1/1 200) GN container.
The drawer opens 110% so that GN containers are easy to place in the drawer.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The worktop has a cold recess that can hold 2x (GN 1/2 150).

Dimensions: 2242x700x835 mm.
Power: 224W /230V.
Net volume: 285 L.
Temperature range -2/+8°C.
Self-closing doors with 120° stop position.
Suitable for GN 1/1 containers.
Adjustable height stainless steel legs 125-200mm.
Epoxy coated wire shelves - maximum load capacity 40 kg.
AISI 304 stainless steel inside and AISI 201 stainless steel outside.