PIZZA WORK TABLE KTL/FT-2018
Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+ 15mm).
Eight drawers can hold 6x (GN1/1 150) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The worktop has a cold recess that can hold 6x (GN 1/2 150).
Product dimensions | 2000 x 650 x 900 mm |
Material: (housing and interior) stainless steel; (work surface) stainless steel.
4 doors, self-closing.
4 height-adjustable grids and 4 sets of support rails.
Extractable compressor for easy cleaning.
Do-it-yourself drawers available separately (see page 69).
Digital temperature control (DIXELL).
Insulation: 60 mm.
Forced air cooling.
Automatic defrost.
Temp.
-2 / +8 °C.
Connection: 230 V - 50 Hz - 0.30 kW.
Grids: 4x W 335 x D 530 mm.
Sound level: 40dB(A).
Content (gross): 616 liters.
External dimensions: W 2230 x D 700 x H 890-950 mm.
6 adjustable feet.
Weight: 193kg.
Refrigerant: R600a.
Energy efficiency class: C (range A+++ to E) with climate class 5 -> high-performance device!.
Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers hold 4x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 7x (GN1/6 150).
The cold compartment is covered by an acrylic glass lid.
Refrigerated worktop.
Digital thermostat.
Automatic defrost.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Ten drawers hold 10x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess holds 9x (GN1/6 150).
The cold recess is covered by an acrylic glass lid.
Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Thirteen drawers can hold 12x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 9x (GN1/6 150).
The cold recess is covered by an acrylic glass lid.
Dimensions: 1342x700x835 mm.
Power: 202W /230V.
Net volume: 143L.
Temperature range -2 to +8 degrees.
Self-closing doors with 120° stop position.
Suitable for GN 1/1 containers.
Adjustable stainless steel legs with a height of 125-200 mm.
Epoxy-coated wire shelves - maximum load capacity 40 kg.
AISI 304 stainless steel inside and AISI 201 stainless steel outside.