Material: (housing and interior) stainless steel.
2 doors, telescopic sliding lid.
Polyethylene cutting board.
Delivery without GN container.
Allocation option above: 2x 1/1 + 2x 1/4 GN containers, up to 150 mm deep (other combinations possible).
2 height-adjustable grids and 2 sets of support rails.
Digital temperature control (DIXELL).
Evaporator foamed on 3 sides.
Static cooling with circulating air fan.
Automatic defrost.
Temp.: +2 / +8 °C.
Connection: 230 V - 50 Hz - 0.23 kW.
Grids: 2x W 323 x D 570 mm.
Sound level: 42dB(A).
External dimensions: W 900 x D 700 x H 870-890 mm.
Weight: 80kg.
Refrigerant: R600a.
Energy consumption: approx.
2.372 kWh/24h (lid closed).

Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Four drawers can hold 4x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
One cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides with the cabinets (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 9x (GN1/6 150).
The cold storage compartment is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers hold 4x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The rear edge of the worktop has a raised cold recess section 1/6 For GN containers.
The cold cavity holds 7x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.

A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Seven drawers hold 7x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 9x (GN1/6 150).
The cold compartment is covered by an acrylic glass lid.

Dimensions: 1342x700x835 mm.
Power: 202W /230V.
Net volume: 143L.
Temperature range -2 to +8 degrees.
Self-closing doors with 120° stop position.
Suitable for GN 1/1 containers.
Adjustable stainless steel legs with a height of 125-200 mm.
Epoxy-coated wire shelves - maximum load capacity 40 kg.
AISI 304 stainless steel inside and AISI 201 stainless steel outside.