Heavy Duty Bain Marie - Double Unit - 70cm Deep - Gas
With this double gas-fired bain marie, it's very easy to cook food or warm it up for later use. Thanks to its large size, it can accommodate various 1/1 GN containers. In addition, you can install this bain marie in a cooking line and use it intensively in any professional kitchen.
Video
Do you work with ingredients that should not get too hot in case they burn or separate? Then this bain marie that works on gas is ideal for helping you melt chocolate or heat sauces, for example. It offers a perfect way to cook food, as well as keep it warm. Fill the bain marie manually with water and the monoblock water basin is completely watertight. To remove the water, you can quickly and easily drain it off using the drain tap. The burner underneath the water basin is made from stainless steel.
Compatible with GN containers
This professional bain marie is suitable for use with 1/1 GN containers. These are not included but can be ordered separately through our webshop. The thick stainless steel and the ergonomic design ensure efficient and quick heating of products. This bain marie is equipped with a pilot light, Piezo electric ignition and a safety valve for the gas with a thermocouple. The temperature in the bain marie can be set up to 90ºC using the thermostat. The water in the bain marie never gets hotter than 100ºC, so the temperature of the food never rises above 100ºC and it cannot boil or burn.
Easy cleaning
The bain marie hardly gets dirty during normal use. However, if you need to clean the appliance, make sure it is switched off after use and remove the GN containers. Be careful though, as hot water droplets can come off the trays. The GN trays can be cleaned in the dishwasher. Drain the water from the bain marie using the tap. The interior and exterior are made from stainless steel and can be cleaned with a damp cloth and a mild detergent. Finally, dry all the parts and put the bain marie back together again.
Features
- Piezo electric ignitions
- Fully watertight monoblock water basin
- Equipped with pilot light
- Suitable for LPG or natural gas
- Safety valve for gas with thermocouple
- Easy and fast draining by rotary water valve
- Stainless steel burner under the water basin
Product specifications
- Net weight: 29,4kg
- Dimensions: W80 x D70 x H28cm
- Total power: 4.0 kW
- Temperature: 90ºC
- Pre-installed gas injectors: G25 – natural gas
- Additional set gas injectors: G30 – LPG (propane / butane)
| Product dimensions | 80 x 70 x 28 cm |
| Net weight, kg | 29.4 |
Material: stainless steel.
Floor, double-walled made of stainless steel.
GN depth from 20mm - 150mm.
4 easy-running wheels (2 with parking brake).
Spiral supply line 850- 2500 mm.
One drain tap per basin.
Easy to move.
Operation on the long side.
Spit guard sold separately.
Delivery without GN container.
Dim.: W 904 x D 704 x H 850 mm.
Capacity: 2x 1/1GN.
Connection: 230 V - 50 Hz - 2 kW.
For the gradual warming or preparing food, this bain marie is ideal. It has been made entirely from stainless steel and is suitable for use with GN containers. This bain marie comes with a convenient drain tap for easy emptying of the reservoir.
With this double-bain marie, it's very easy to cook food or warm it up for later use. Thanks to its large size, it can accommodate various 1/1 GN containers. In addition, you can install this bain marie in a cooking line and use it intensively in any professional kitchen
HENDI tin with wick, contains 100% diethylene glycol.
Burns up completely.
Soot and odour free.
Special wick provides proper burning temperature and time.
The can does not overheat, no fuel holder needed.
Equal flame temperature and height during the whole burning process.
Box 4x6 tins.
Due to the special cap, it is possible to use the same can several times, store it and transport it safely.
41,80 €
Stylish and functional design by Dutch designer Robert Bronwasser.
Body made from high temperature resistant polypropylene.
Removable 8 litre soup container made of AISI 304 stainless steel, easy to clean.
Heating element made from AISI 304 stainless steel and placed in the water container for efficient heat transfer.
Tempered glass lid fitted with insulated handle, ladle notch and aluminium hinge.
The design of the two-part lid reduces the heat loss by opening, while maintaining optimal hygienic conditions.
Integrated card holder on the lid for product name cards.
Digital control panel with display to show working time, set temperature and actual temperature.
The last temperature setting is saved in memory and will be selected every time the power is turned on.
Temperature can be set from 35 up to 85˚C in 1˚ increments.
Water container is embossed with a max.
fill line, indicating ≈1.5 L.
Not intended for cooking, only for keeping warm.
159,20 €
