Single pedestal pillar tap.

Rinser resistant to high pressure water flow.

Maximum water flow: 17 L/min.
at a pressure of 4 bar.

Plastic rinser handle.

Adjustable column support.

Wall mount (optional shortening).

Connection hoses: 1/2”, 400 mm long each.

Table hole required: Ø 27 mm.

HENDI tin with wick, contains 100% diethylene glycol.

Burns up completely.

Soot and odour free.

Special wick provides proper burning temperature and time.

The can does not overheat, no fuel holder needed.

Equal flame temperature and height during the whole burning process.

Box 4x6 tins.

Due to the special cap, it is possible to use the same can several times, store it and transport it safely.

Excellent for fat-free grilling
Hob made of S355J2 soft steel, smooth
Two heating zones, controlled separately, each with 3 tubular multiramp burners made of stainless steel
Gas power of one heating zone: 5 kW
Temperature controlled by a thermocouple with safety valve that cuts off gas supply to the burners in case the flame goes out
Electric igniter – connection to 230 V supply required
The hob is slightly inclined frontwards to make rendered fat flow down during grilling, includes an opening and a slidable drawer
Base made as an open cabinet made of AISI 430 steel, 380 mm high
Device fitted as standard with NG50 (G30) gas nozzles
Nozzles for cylinder LPG included
Gas connection in the rear left part, at approx.
550 mm
Steel feet adjustable from 100 to 165 mm